Search form

×
Your shopping cart is empty.

Anti Rust NCML solution

Primary tabs



Product Code ::RXSOL-22-1820-025
Categories: Rust Clean & Protect-28
Product Short Description: Oxalic acid based Anti Rust NCML solution main applications include antirust, general metal and equipment cleaning or bleaching, especially for the removal of rust iron complexing agent.
Product Description:

Oxalic acid main applications include cleaning or bleaching, especially for the removal of rust (iron complexing agent). And also use as general metal and equipment cleaning, purifying agent and intermediate for many compounds.

Product Application:

General metal and equipment cleaning, purifying agent and intermediate for many compounds. We are specialize to manufacture pure and free from impurities of Oxalic acid. And We have supply stock at various part of country. RXSOL trade as a no 1 supplier in Mumbai, Jnpt, Kandla, Gandhidham, Mundra, Manglore, Goa, Kakinada, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Pirpav, Surat, Fujairah, Dubai, Sharjah, Abu Dhabi, Middle East, Gulf. We are exporter of RXSOL brand Oxalic Acid.

Product Dose:


REMOVAL OF IRON STAINS
Iron stains can be removed by scrubbing the stained area with an aqueous solution of oxalic acid in water. Dissolve 1kg oxalic acid to 6Lt of warm water. Scrub stained area using a stiff-bristle brush. Thoroughly rinse with water after treatment. When completely dry, lightly sand the surface. Surface must be clean and
completely dry (not just surface dry) before refinishing. Incomplete drying and retained subsurface moisture can cause finish adhesion failure.

Product Note:
Oxalic Acid dissolving iron oxides because it forms a soluble iron oxalate complex. The acid is only weakly corrosive but it is a poison if ingested, so handle both the powder and solution with care. 
Industrial area:

Anti-Rust NCML Solution

Anti-Rust NCML Solution is a corrosion-protection chemical designed to help protect ferrous metal surfaces from rust and atmospheric corrosion during storage, transportation, and industrial handling. It can be used as part of a temporary corrosion-protection system for machinery, metal components, fabricated parts, tools, and equipment.

The solution forms a protective layer on the metal surface, helping reduce the contact of the substrate with moisture, oxygen, and other corrosive environmental contaminants.

Key Applications

  • Metal component protection

  • Machinery and equipment preservation

  • Automotive components

  • Steel and fabricated parts

  • Industrial equipment storage

  • Marine equipment and spare parts

  • Protection during transportation

  • Temporary rust prevention

Key Benefits

  • Helps prevent rust and atmospheric corrosion

  • Suitable for temporary metal protection

  • Easy application

  • Useful during storage and transportation

  • Helps extend the service life of protected metal components

  • Can be incorporated into industrial corrosion-protection programs

Remarks:

Handling Procedure ::: ---
Donot contact with skin and eyes. May cause burns or irritation. Harmful if swallowed. Can be Neutralised by use Ammonia or Borax, or wash with water.
DO NOT allow solution to get into gloves or soak through clothing to skin.

Other Equivalent Brand:

NCML solution

Product Tag Identification:

#AntiRust_MuscatOman
#AntiRust_DubaiSharjahUAE
#Antirust_MumbaiKandlaKolkataVizagChennai

Product Useful Area:

Keyword:

In general, the oxalic removes fine-grained, powdery limonite or hematite deposits easily, but thick solid iron oxide crusts dissolve very slowly. Crystalline hematite patches become bright and shiny and dissolve very slowly. Oxalic acid is not good for cleaning specimens containing calcite or some other calcium minerals, as it dissolves these. Fluorite is not cleaned very well by oxalic acid and seems to be etched by it. Yellow stains can result if specimens are left in oxalic acid as it evaporates. (they should always remain completely covered by the acid.) Also, using too much baking soda to neutralize the acid can result in yellow staining.

When completely successful, oxalic acid cleaning will remove all traces of yellow-orange iron staining, for example, a specimen of clean dark smoky quartz and pure white feldspar. Many specimens, however, are too thoroughly iron-coated to achieve this goal, and the feldspar will always retain some pale red color. Yellowstained, greenish-looking amazonite becomes a clean, bluer shade after cleaning. 

packaing_size:

Oxalic Acid Rust Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Oxalic Acid Rust Remover at a competitive price from us. We have ready stock of Oxalic Acid Rust Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates