GREASES
Safe Scale Remover with Indicator
Product code RXSOL-22-2210-200
Safe scale Cleaner with end point colour Indicator
Description
Safe scale Cleaner with end point colour Indicator. Low Foaming Solution. Safely removes scale from cooling towers, pipes, Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form without system shutdown
It Effectively Removes Scale, Heavy Slime and Algae from surface. RXSOL 555 is an inhibited phosphoric acid descaler which is much safer and non-fuming. Also safe on paint.
Application
Application
Typically 3% concnetrated solution of RXSOL-22-2210-200 ( 3 Ltr for each 100 liters ) of system circulate in system to operate normally for 24-48 hours with the bleed line turned off, then drain the whole system. Repeat 2 or 3 times the normal rate to dilute unused RXSOL-22-2210-200.
RXSOL-22-2210-200 is colour coded. When first added to the system, the system water will be red in colour. As RXSOL-22-2210-200 works at dissolving scale, it will change to yellow. When this happens, simply add more RXSOL-22-2210-200 to the system until the system water is red again, then allow the system water to circulate process until the system water just remains red.
Precautions
Precautions
Before using this product, check its suitability on galvanised surfaces by making a 50/50 solution with water and dabbing on a non-critical surface. If no discolouration accurs, it is safe to continue.