PRELOAD Slip HOLD BLOCK

PRELOAD Slip HOLD BLOCK Application Procedure

Before application, previous cargo residues should be completely removed, and the existing paint/coating on the surface should be properly cured. 

Application guidance recommends using suitable low-pressure spraying equipment. Application should begin at the bottom of the bulkheads and proceed upward, followed by the tank sides and tank tops. The nozzle is positioned approximately half a metre from the surface during application.
The stated coverage is approximately 16–18 m² per litre, depending on application conditions and surface characteristics. After application, the coating should be allowed to dry completely before loading cargo. Typical drying time is approximately 1–2 hours, depending on temperature and humidity. 

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

General Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.