Skip to content
Boiler Chemicals

One Shot Universal Liquid Treat

Product code RXSOL-40-5001-210

It is a well - balanced blend for boiler water treatment products, resulting in a scale and corrosion control by one shot operation. A powdered one-step treatment to control the formation of rust and scale in low pressure and auxillary boilers with workin

Description

It is a well - balanced blend for boiler water treatment products, resulting in a scale and corrosion control by one shot operation. A unique one-step Boiler treatment liquid  to control the formation of rust and scale in low pressure and auxillary boilers with working pressure up to 20 bars.

Application
Application
The dosage rate is dependent on the boiler operating condition, feed 2-3 ltrs of RXSOL-50-5001-020 solution per thousand ltr of boiler water then control the system by the periodic Alkalinity test procedure. If p-Alkalinity is below 200 ppm increase the ratio of RXSOL BWT 5001 solution. If p-Alkalinity is above 400 ppm reduce the concentration of RXSOL-50-5001-020 solution by dilution with water. RXSOL-50-5001-020 is strongly alkaline.RXSOL-50-5001-020  is best-applied heat or diluted with any convenient strength on a continuous basis using a suitable chemicals pump. The product should be applied to the boiler feed tank or feed line to ensure adequate mixing.
Precautions
Precautions

CHARACTERISTIC :

  • Convenient liquid treatment, which provides the basic alkalinity on which successful water treatment depends.
  • Provides optimum conditions for hardness control to function.
  • Neutralizes acid conditions.
  • Will assist in keeping silica in suspension.
  • Simple test to determine level of treatment.
  • Can be used in boilers of all pressures.
  • Can be used as a neutralizer after acid cleaning operations
  • Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
  • Dispersant action suspends sludge and sediment particles for efficient blow down.
  • Oxygen scavenging for optimum protection.
  • Protects boiler, steam lines, condensate lines and feed water lines from corrosion.
  • Fast action due to catalyst.
  • Simple test to determine level of treatment.