Corrosion Inhibitor Antifoulant Marine Anti Algea Insect Seaweed Barnacles
Product code RXSOL-40-4025-025
Gives complete protection against corrosion andfouling by marine growth such as algae, moss, shellfish andmicro-organisms in seawater cooling systems. It is also usedas an effective biocide to treat diesel engine cooling watersystems against micro-organis
Description
Corrosion inhibitor/antifoulant - cooling water, closed circuit systems
RXSOL-40-4025-025 is a superior corrosion inhibitor developed for closed water circulating systems. RXSOL-40-4025-025 is based on a blend of organic and inorganic corrosion inhibitors intended to protect steel, copper and other non-ferrous metals. RXSOL-40-4025-025 is an ideal treatment for closed chilled water and low pressure heating systems. RXSOL-40-4025-025 is NOT intended for use in systems containing Aluminium. When compared with more traditional nitrite-borate based corrosion inhibitors RXSOL-40-4025-025 offers the benefit of a lower dosage rate and will raise the system TDS to a much lesser degree.
Dosing of RXSOL-40-4025 should be dosed at 1000 - 2000 ml/m3 in order to give an active reserve of 200ppm of sodium nitrite. In systems requiring significant passivation higher initial dosages may be required to yield the required nitrite residual.
RXSOL-40-4025-025 gives complete protection against corrosion and fouling by marine growth such as algae, moss, shellfish andmicro-organisms in seawater cooling systems. It is also usedas an effective biocide to treat diesel engine cooling watersystems against micro-organisms and bacteria.
Application
Anti-foulant and corrosioninhibitor for sea watercooling systems
It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of microorganism < bacteria , fungi , larvae etc.. ( EXISTING GROWTH CAN BE CLEAN BY USING RXSOL-11-1008--DC / RXSOL-54-1008-SA )
Precautions
1 . Avoid to use in any food area / food crop ( FARMING PURPOSE ).
2 . It is strongly recommended to clean entire fouled contaminated system prior to its use .
3. IT SHOULD ONLY BE DILUTED WITH FRESH WATER .
4. Causes eye and skin irritation , WORKERS must wear all chemical resistant apron and face mask , long pants , shoes. Strictly avoid contamination of food items.