Skip to content
RO Chemicals

Membrane ALKA Clean RXSOL ORG-10

Product code RXSOL-33-3320-025

High pH formulation that has been designed specifically to remove organics, silt and other particulate deposits from all polyamide, polysulfone and thin film composite membrane surfaces. Also active against biofilm and foulants.

Description

Membrane ALKA Clean RXSOL ORG-10 is a high pH formultion that has been designed specifically to remove organics, silt and other particulate deposits from all polyamide, polysulfone and thin film composite membrane surfaces.

Membrane ALKA Clean RXSOL ORG-10 is a powdered buffered alkaline detergent developed, Especially for cleaning alkaline tolerant reverse osmosis and ultrafiltration membranes.

Membrane ALKA Clean RXSOL ORG-10 has been developed as a general-purpose membrane cleaner for an extensive range of organic based foulants found in Reverse Osmosis and Nano-filtration membrane systems. Membrane ALKA Clean RXSOL ORG-10 is particularly effective against aluminium silicate, which can be difficult to remove with conventional cleaners.
 

High-performance alkaline cleaning agent designed for use in Reverse Osmosis (RO) and Nano-Filtration (NF) membrane systems. It is especially effective against a wide range of organic foulants, biofilm, and aluminium silicate scale — one of the most difficult-to-remove deposits in membrane systems.

This formulation combines powerful dispersants, chelating agents, and surfactants in a synergistic blend that penetrates and solubilizes stubborn deposits without harming membrane integrity when used as recommended.

Application
Application

Inspect cleaning tank, hoses and cartridge filter. Install new filter elements.
Fill cleaning tank with RO solution then, Slowly add 25 grammes of ORG 10  for each litre of cleaning tank capacity. Thoroughly mix cleaning solution by using a mixer or by circulating it through the cleaning pump. The solution may be heated to improve cleaning effectiveness.
Do not exceed the membrane manufacturer’s temperature limits.
Circulate the solution through the membrane bank in the feed direction for one hour at the flow rate recommended by the membrane or system manufacturer. If the manufacturer’s recommendations are not available, the following guidelines may be used.

Maintains production capacity

Special formula maintains membrane flux rate 

Chelates and buffered alkalinity effectively remove fouling agents from alkaline 

Tolerant   RO and UF membranes

 

BENEFIT ::: 

Dissolves freely to reduce labor and cleaning time, Easy to add balance formulation eliminates need for adding separate additives or boosters, Rinse quickly and completely to reduce cleaning time

 

ITS ADVANCE FORMULATION Makes Economical use cost and recommended use dilution, Chlorine free formulation helps assure compatibility with membrane to Extent membrane life. 

 

Key Areas of Application of Membrane ALKA Clean RXSOL ORG Membrane Cleaner

  • Reverse Osmosis (RO) Membrane Systems
  • Nano-Filtration (NF) Systems
  • Ultra-Filtration Pre-Cleaning (as compatible)
  • Desalination Plants, Water Recycling, and Process Water Systems
Precautions
Precautions

RXSOL ORG 10 is also suitable for meat and poultry plant as a cleaner for reverse  Osmosis and Ultra filtration membranes. RXSOL ORG 10 must be used in a manner which prevents  direct  or indirect contamination of edible.