Combotreat Boiler Chemical: The Ultimate Solution for Boiler Efficiency in the INDIA UAE OMAN

Sodium Sulphite sulfite with Catalyst Powder

Product Code ::RXSOL-19-1305-025

Product Short Description: Removal of oxygen using commercial sodium sulfite and a catalyzed sodium sulfite makes great difference . After 25 seconds of contact catalyzed sodium sulfite removed the oxygen completely.

Remarks:

Oxygen Control

Chemical Oxygen Scavengers. The oxygen scavengers most commonly used in boiler systems are sodium sulfite, sodium bisulfite, hydrazine, catalyzed versions of the sulfites and hydrazine, and organic oxygen scavengers, such as hydroquinone and ascorbate.

It is of critical importance to select and properly use the best chemical oxygen scavenger for a given system. Major factors that determine the best oxygen scavenger for a particular application include reaction speed, residence time in the system, operating temperature and pressure, and feedwater pH. Interferences with the scavenger/oxygen reaction, decomposition products, and reactions with metals in the system are also important factors. Other contributing factors include the use of feedwater for attemperation, the presence of economizers in the system, and the end use of the steam. Chemical oxygen scavengers should be fed to allow ample time for the scavenger/oxygen reaction to occur. The deaerator storage system and the feedwater storage tank are commonly used feed points.

In boilers operating below 1,000 psig, sodium sulfite and a concentrated liquid solution of catalyzed sodium bisulfite are the most commonly used materials for chemical deaeration due to low cost and ease of handling and testing. The oxygen scavenging property of sodium sulfite is illustrated by the following reaction:

2Na₂SO₃	+	O₂	®	2Na₂SO₄
sodium sulfite		oxygen		sodium sulfate

Theoretically, 7.88 ppm of chemically pure sodium sulfite is required to remove 1.0 ppm of dissolved oxygen. However, due to the use of technical grades of sodium sulfite, combined with handling and blowdown losses during normal plant operation, approximately 10 lb of sodium sulfite per pound of oxygen is usually required. The concentration of excess sulfite maintained in the feedwater or boiler water also affects the sulfite requirement.

Sodium sulfite must be fed continuously for maximum oxygen removal. Usually, the most suitable point of application is the drop leg between the deaerator and the storage compartment. Where hot process softeners are followed by hot zeolite units, an additional feed is recommended at the filter effluent of the hot process units (prior to the zeolite softeners) to protect the ion exchange resin and softener shells.

As with any oxygen scavenging reaction, many factors affect the speed of the sulfite-oxygen reaction. These factors include temperature, pH, initial concentration of oxygen scavenger, initial concentration of dissolved oxygen, and catalytic or inhibiting effects. The most important factor is temperature. As temperature increases, reaction time decreases; in general, every 18°F increase in temperature doubles reaction speed. At temperatures of 212°F and above, the reaction is rapid. Overfeed of sodium sulfite also increases reaction rate. The reaction proceeds most rapidly at pH values in the range of 8.5-10.0.

Certain materials catalyze the oxygen-sulfite reaction. The most effective catalysts are the heavy metal cations with valences of two or more. Iron, copper, cobalt, nickel, and manganese are among the more effective catalysts.

Removal of oxygen using commercial sodium sulfite and a catalyzed sodium sulfite makes great difference. After 25 seconds of contact, catalyzed sodium sulfite removed the oxygen completely. Uncatalyzed sodium sulfite removed less than 50% of the oxygen in this same time period. In a boiler feedwater system, this could result in severe corrosive attack.

The following operational conditions necessitate the use of catalyzed sodium sulfite:

low feedwater temperature
incomplete mechanical deaeration
rapid reaction required to prevent pitting in the system
short residence time
use of economizers

High feedwater sulfite residuals and pH values above 8.5 should be maintained in the feedwater to help protect the economizer from oxygen attack.

Some natural waters contain materials that can inhibit the oxygen/sulfite reaction. For example, trace organic materials in a surface supply used for makeup water can reduce speed of scavenger/oxygen reaction time. The same problem can occur where contaminated condensate is used as a portion of the boiler feedwater. The organic materials complex metals (natural or formulated catalysts) and prevent them from increasing the rate of reaction.

Sodium sulfite must be fed where it will not contaminate feedwater to be used for attemporation or desuperheating. This prevents the addition of solids to the steam.

At operating pressures of 1,000 psig and higher, hydrazine or organic oxygen scavengers are normally used in place of sulfite. In these applications, the increased dissolved solids contributed by sodium sulfate (the product of the sodium sulfite-oxygen reaction) can become a significant problem. Also, sulfite decomposes in high-pressure boilers to form sulfur dioxide (SO2) and hydrogen sulfide (H2S). Both of these gases can cause corrosion in the return condensate system and have been reported to contribute to stress corrosion cracking in turbines. Hydrazine has been used for years as an oxygen scave

Other Equivalent Brand:

Catalyzed sodium sulfite for corrosion prevention, Na2SO3

Images:

Keyword:

Also we are keeping ready stock of these products :

SODIUM SULPHATE 99% WHITE POWDER CRYSTAL 50 KG BAG
PHOSPHORIC ACID 85% WHITE LIQUID POWDER
Caustic Soda Lye
HYDROGEN PEROXIDE 50% LIQUID 35 KG CARBOY PACK
CITRIC ACID 99% POWDER
caustic soda flakes
BLEACHING POWDER
SODIUM NITRATE
ACETIC ACID

EDTA Disodium

Calcium chloride - Powder & Prills

Ammonium sulphate - White & Light Yellow

Sodium Sulphate

Boric Acid

Copper sulphate

Sodium Thiosulphate

Potassium chloride powder

Sodium Sulphite - 90% & 96%

packaing_size:

Sodium Metabisulfite supplier and exporter. Sodium Metabisulphite also called sodium pyro sulphite. Food grade of Sodium sulphite is used as preservative agent, reducing agent, Antibrowning agent, antioxidant, flour treatment agent also as preservative in biscuit industries.

We are keeping ready stock of Sodium Metabisulfite in 25 Kg and 50 Kg pack. And we are one of popular sodium metabisulphite supplier in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Fujairah, Dubai, Sharjah, Abu Dhabi, Sodium Sulphite supplier in Barka Ruwi Muscat Oman

Sodium Metabisulfite is White crystals or crystalline powder having an odour of sulfur dioxide

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

ComboTreat New Formula

Product Code ::RXSOL-50-5004-020

Product Short Description: Well-balanced blend of several powder with antifoaming agent for boiler water treatment, resulting in a scale and corrosion control by one simple operation. It is applied to types of boiler water systems, providing excess protection from the hard, sl

Remarks:

RXSOL-50-5004-020 is dependent on boiler operating condition, Feed 200 gm to 1 Kg of RXSOL-50-5004-020 solution for per thousand Ltr of boilers water Then control the system by Periodic Alkalinity test procedure. FREE LOGSHEET is available for our registered member. ( Maintaining of Logsheet allow to observing and evaluating the test results trend in order to use the exact amount needed for the stabilization of the system
If p-Alkalinity is below 200 ppm increase the ratio of RXSOL-50-5004-020 solution. If p-Alkalinity is above 400 ppm reduce the concentration of RXSOL-50-5004-020 solution by dilution with water.

RXSOL ALKALINITY, PHOSPHTE and SULFITE TEST KITS are available on request.

USES PROCEDURE : Always dissolve powder before feeding in BOILER WATER TANK.

Control Procedure:-

Control is by simple boiler water tests or RX CLEANSERS can provide a suitable test kits for this purpose

Other Equivalent Brand:

COMBITREAT powder 20 Kg

Images:

Keyword:

Product Properties:-

Appearance	Dry powder compound consisting of alkaline compounds, oxygen binders, corrosion inhibitors, sludge conditioners and antifoam agents.
Solubility In Water	Complete
pH (1 Vol %)	9-10
Compatibility
Metal	Corrosive to aluminium, magnesium, zinc and tin.
Rubber	No known effect.
Packaging	Odourless Compound , Handle with care, Store in dry, cool and well open ventillated area. Keep drums tightly closed when not in use.	Size:25 (Kg)

packaing_size:

Combotreat Boiler Chemical: The Ultimate Solution for Boiler Efficiency in the INDIA UAE OMAN

Introduction of Specialized Boiler Water Treatment Chemical COMBOTREAT:

In the dynamic industrial sectors of the INDIA UAE OMAN, where efficiency and sustainability are key, reliable boiler water treatment is no longer optional it is essential. Untreated boilers suffer from scaling, corrosion, and energy loss, leading to costly repairs and environmental non-compliance.

Enter Dubi Chem Marine International, a leading provider of advanced chemical solutions across the Middle East. Today, we dive deep into their flagship offering: Combotreat Boiler Chemical (RXSOL-50-5004-007) the ultimate solution for optimal boiler water treatment in the INDIA UAE OMAN.

About RXSOL GROUP

RXSOL MARINE CHEMICAL DIVISION is a globally recognized name based in the UAE, serving critical sectors including marine, oil and gas, power generation, and manufacturing. Specializing in eco-friendly chemical formulations, Dubi Chem has been at the forefront of industrial boiler maintenance and marine boiler protection across ports like Fujairah, Dubai, Sharjah, Khor Fakkan, Abu Dhabi, Barka, Sohara, Muscat Oman, Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Paradip, Surat Gujrat

Their commitment to quality, innovation, and environmental stewardship has made them a trusted partner for industries operating in some of the world’s busiest shipping lanes and industrial hubs.

Understanding Boiler Water Treatment

Boilers, whether in a marine vessel in Mumbai, Sohar, Sharjah or a power plant in Kolkata, Muscat, Abu Dhabi, are subjected to aggressive conditions. If the feed water contains impurities like calcium, magnesium, or oxygen, it leads to:

Scaling: Hardness salts form solid layers inside the boiler, reducing heat transfer efficiency.
Corrosion: Oxygen and carbon dioxide attack metal surfaces, causing leaks and failures.
Acidic Conditions: Low pH water damages internal boiler surfaces.

Unchecked, these problems lead to operational inefficiencies, costly repairs, forced shutdowns, and increased carbon emissions.

Boiler water treatment in UAE industries is, therefore, not just about maintenance it’s about operational excellence, safety, and regulatory compliance.

What is Combotreat Boiler Water Tretment Chemical (RXSOL-50-5004-007)?

Combotreat Boiler Chemical is a sophisticated blend of:

Alkalinity Builders: To maintain a protective pH level and prevent acidic corrosion.
Phosphates: To precipitate hardness salts and prevent scaling.
Sludge Conditioners: To keep precipitates suspended, allowing easy blowdown.

This multi-function dry powder simplifies boiler water treatment into one easy operation, combining multiple protective actions into a single application.

Key Features of Combotreat Boiler water Treatment Chemical

Corrosion Inhibition: Protects boiler tubes, feed lines, and steam lines.
Scale Control: Prevents the deposition of calcium and magnesium salts.
Simple Dosing: Easily applied using a pot feeder or chemical pump.
Eco-Friendly: Meets international standards for environmental safety.
Wide Compatibility: Suitable for all types of industrial and marine boilers.

Detailed Benefits of Using Combotreat Boiler water Treatment Chemical

Extended Equipment Lifespan: Reduces corrosion and scaling, prolonging the life of critical assets.
Enhanced Energy Efficiency: Maintains optimal heat transfer and reduces fuel consumption.
Reduced Maintenance Costs: Fewer cleaning cycles, minimized downtime, and lower repair expenses.
Operational Stability: Consistent boiler performance even under challenging water conditions.
Environmental Compliance: Supports UAE’s environmental initiatives and sustainability goals.

Why Combotreat is Ideal product for Boiler Industries

In the India UAE oman, industries operate under some of the harshest environmental conditions:

High-temperature operations
Hard water from desalination plants
Marine and industrial pollutants

Combotreat Boiler water Treatment Chemical is specially engineered for these conditions, making it ideal for:

Marine fleets operating through Port of Mumbai, Fujairah and Mina Zayed, Sohar
Oil refineries in Mumbai Jamnagar, Sohar, Muscat, Sharjah and Abu Dhabi
Power generation facilities in Chhatisgarh, Muscat, Ras Al Khaimah
Industrial manufacturers in Surat, Sohar, Jebel Ali and Al Ain

Its resilience against high hardness and its compatibility with a wide range of boiler designs make it the best boiler chemical solution in the UAE.

Real-World Case Study: Powering Efficiency of Combotreat Boiler Water Treatment Chemicals in Fujairah, Mumbai, Muscat

Case Study:
A major marine shipping company operating out of Fujairah Port faced recurring boiler issues, including scaling and energy loss, causing frequent maintenance shutdowns. After adopting Combotreat Boiler Chemical from RXSOL GROUP:

Scaling was reduced by 85% within three months.
Boiler downtime decreased by 30%, saving thousands of dollars.
p-Alkalinity was consistently maintained within the ideal 200–400 ppm range.

As a result, the company reported a significant boost in operational efficiency and profitability.

Application Instructions for RXSOL-50-5004-007

How to Apply:

Use a bypass pot feeder or continuous chemical pump directly into the boiler feed line.
Dosage: 1 Kg of RXSOL-50-5004-007 per 1000 liters of boiler water.
Monitoring: Maintain a p-Alkalinity range of 200–400 ppm through regular testing.
Adjustment:
- If p-Alkalinity is below 200 ppm: Increase dosage.
- If p-Alkalinity is above 400 ppm: Dilute the chemical solution.

Pro Tip: Always apply the chemical into the feedwater line or feedwater tank for thorough mixing.

Safety Measures and Handling Guidelines

Personal Protective Equipment (PPE): Goggles, PVC gloves, and protective clothing.
Storage: Store in cool, dry conditions in 25 Kg or 50 Kg drums.
First Aid:
- Skin Contact: Rinse immediately with plenty of water.
- Eye Contact: Flush with water for 15 minutes and seek medical attention.
- Ingestion: Do not induce vomiting. Administer water and contact a doctor immediately.
General Caution: Keep an eyewash station nearby while handling.

Comparing Combotreat to Other Boiler Chemicals

Combotreat Boiler Chemical offers several competitive advantages:

Multi-Action Protection: Scale prevention, corrosion control, and sludge dispersion in one treatment.
Higher Efficiency: Superior performance even under high-temperature, high-hardness feedwaters.
Ease of Monitoring: Simple p-Alkalinity testing allows easy control.
Better Value: One product replaces multiple treatments, lowering overall chemical costs.

Unlike traditional phosphate-only or oxygen-scavenger-only treatments, Combotreat delivers comprehensive boiler protection, making it the best boiler chemical for industrial plants and marine vessels in the India, Sohar, Middle East.

Industries Benefiting from Combotreat

Marine Industry: Protecting ship boilers at major UAE ports like Dubai, Fujairah, Sharjah, and Abu Dhabi.
Oil and Gas Refineries: Ensuring smooth operations in Ras Al Khaimah and Sharjah.
Power Generation: Enhancing thermal efficiency in DEWA, FEWA, and private plants.
Heavy Industries: Supporting manufacturing units, metalworks, and food production plants across the Emirates.

FAQs about Combotreat Boiler Chemical

1. Can Combotreat Boiler Chemical be used for auxiliary and waste heat boilers?
Yes, it is highly effective for auxiliary, waste heat, and package boilers.

2. How soon will I see results after using Combotreat?
Improvements in scale reduction and system stability can be seen within a few weeks.

3. What is the shelf life of RXSOL-50-5004-007?
If stored properly, the shelf life is at least 2 years.

4. Can I use Combotreat for acid cleaning neutralization?
Yes, it is ideal for post-acid cleaning neutralization processes.

5. Is Combotreat suitable for low-pressure boilers?
Yes, it works effectively across a full range of boiler pressures.

6. Can it help with silica suspension?
Yes, Combotreat assists in keeping silica particles suspended.

7. What testing equipment do I need to monitor treatment?
A basic p-Alkalinity test kit, available from Dubi Chem Marine International.

8. Is the chemical compatible with rubber-lined systems?
Yes, it has no known adverse effects on rubber.

9. Will it harm aluminum, magnesium, or zinc components?
Care should be taken as it is corrosive to these metals.

10. How can I place a bulk order in UAE?
Contact Dubi Chem Marine International at rxmarinegroup @ Gmail.com for wholesale inquiries.

Ordering Combotreat Boiler Chemical in the UAE

For fast deliveries across Fujairah, Dubai, Sharjah, Abu Dhabi, and other Emirates, contact Dubi Chem Marine International today!
Email: rxmarinegroup @ gmail.com

Experience high-quality boiler water treatment in UAE industries — ensuring efficiency, protection, and peace of mind.

Dubi Chem’s After-Sales Services

Technical Consultation: Expert advice on application and dosage.
Custom Solutions: Tailored chemical blends for specific industry needs.
Test Kits and Training: Boiler water testing kits and staff training sessions.
Customer Support: Responsive service to resolve queries and provide on-site assistance if needed.

Conclusion

Industrial boilers are the heart of countless operations across the India, Oman, UAE.
By choosing Combotreat Boiler Chemical from RXSOL GROUP, you invest in:

Longer equipment life
Greater energy efficiency
Lower operating costs
Environmental compliance
Trusted after-sales support

Whether you are operating from Mumbai, Gandhidham, Sohar, Muscat, Fujairah Port, Sharjah Industrial Zone, or Abu Dhabi’s energy sector, ensure your boilers run at peak performance.
Contact Dubi Chem today and unlock a new era of operational excellence!

Combotreat manufacturer and supplier in Mumbai, Navi Mumbai, Rabale Turbhe MIDC, Gandhiddham, Surat, Mundra, Sikka, Hazira, Goa, Manglore, Kolkata, Ennore Chennai, Haldia, Visakhapatnam Vizag, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Middle East, UAE, Muscat, Barka Oman, Canada

Combotreat New Formulla Boiler Water Treatment ONE SHOT powder formula manufacttuer and supplier in Mumbai, Kandla Gandhidham, Chennai Ennore, Vizag Gangavaram, Kolkata, West Bengal, Paradip, Abudhabi, Dubai, Sharjah, Ajman, Abudhabi, Ruwi Barka Ghala, Muscat, Oman, Sohar, NAirobi Kenya, Canada,

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

Potable Water Stabilizer Liquid FRESH WATER

Product Code ::RXSOL-51-6002-025

Product Short Description: The product effectively and economically provides scale and corrosion control in potable water and other shipboard once-through water systems. And specially designed to reduce the corrossion that is created in the storage systems of pot water.

Remarks:

Other Equivalent Brand:

RXSOL - 624916 POTABLE WATER STABILIZER, chemo PWS, Caretreat PWT, Fresh Water Treatment. Potable Water Stabiliser Kit Liquid

Images:

Keyword:

packaing_size:

Potable Water Stabilizer Liquid FRESH WATER manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Potable Water Stabilizer Liquid FRESH WATER at a competitive price from us. We have ready stock of Potable Water Stabilizer Liquid FRESH WATER in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

Sludge Conditoner for Boiler Water

Product Code ::RXSOL-50-5010-020

Product Short Description: This high performance product is applicable to both medium and low-pressure steam boilers in order to prevent sludge deposits.

Remarks:

Other Equivalent Brand:

DM-520

Images:

Keyword:

packaing_size:

Sludge Conditoner for Boiler Water manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sludge Conditoner for Boiler Water at a competitive price from us. We have ready stock of Sludge Conditoner for Boiler Water in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

CAT Sulphite Sludge Conditioner

Product Code ::RXSOL-50-5008-020

Product Short Description: Boiler Coagulant prevents the formation of deposits on boiler internal surfaces. Sludge is kept dispersed in small particles and conditioned to be removed normal blow down. In this way tube over heating due to deposits is avoided.

Remarks:

Other Equivalent Brand:

Boiler Sludge Conditioner Sulfite, MAXTREAT 3001

Images:

Keyword:

packaing_size:

CAT Sulphite Sludge Conditioner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of CAT Sulphite Sludge Conditioner at a competitive price from us. We have ready stock of CAT Sulphite Sludge Conditioner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

BIOCIDE MICRO for Water Treatment

Product Code ::RXSOL-40-4009-020

Product Short Description: Strong algae depressant fully compatible with alkalizing and flocculating agents normally used in cooling / boiler water. Algae growth is the main cause of colour in water. Routine and weekly additions of RXSOL-40-4009-020 establish a buffer action

Remarks:

Where MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 can be used?

For the control of microbial biofilms, bacteria, algae, and fungi, add MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 to industrial recirculating water cooling towers, industrial recirculating closed loop water cooling systems, brewery pasteurizer and can warmer systems. Add MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 at some point in the system to ensure uniform mixing.

Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020
NOTE: Badly fouled systems should be cleaned before treatment.

INITIAL DOSE: if the system is initiating fouling then use 200 ml - 3 ltr of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 for per 3000 to 5000 Ltr of water in the system.) Dose can be increased till optimum results.

WEEKLY CONTROL DOSE: When microbial control is evident, add 100 to 500 ml per MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 for per 3000 to 5000 Ltr of water in the system

AIR WASHER SYSTEMS : Add to the air washer sump or chill water sump to insure uniform mixing, 200 ml - 3 Ltr of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 for per 3000 to 5000 Ltr of water in the system, DOSE ration directly proportional of contamination to control microbial biofilms, bacteria, fungi, and algae which cause fouling in industrial air washer systems.

Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 for CONTINUOUS FEED METHOD

Maintain this treatment level by adding a continuous feed of 100 ml to 1000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 per 1000 gallon of makeup water).

NOTE : Badly fouled systems must be cleaned before initial treatment.

Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 for INDUSTRIAL WASTEWATER TREATMENT SYSTEMS AND SEWAGE SYSTEMS

INITIAL DOSE for Noticeably Fouled Condition: 500 ml - 4000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 per 3000 Ltr of water in the system. Repeat until control is achieved. Badly fouled systems should be cleaned before treatment is begun.

SUBSEQUENT DOSE: When microbial control is evident, add 100 ml - 100 ml MICRO BIOCIDE Cooling Water RXSOL-40-4009-020 per 3000 Ltr of water in the system.

Other Equivalent Brand:

OXIDIZING BIOCIDE

Images:

Keyword:

Strong algae depressant fully compatible with alkalizing and flocculating agents normally used in cooling / boiler water. Algae growth is the main cause of colour in water. Routine and weekly additions of RXSOL-40-4009-020 establish a buffer action to control very rapid algae growth.

packaing_size:

BIOCIDE MICRO Cooling Water 20 Ltr manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of BIOCIDE MICRO Cooling Water 20 Ltr at a competitive price from us. We have ready stock of BIOCIDE MICRO Cooling Water 20 Ltr in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations :

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates